Electrical Servo & Stepper Motors & Drives

Surplus USA Home Page 

How To Order

      

Email us with any questions, CLICK HERE PLEASE Include ITEM #

Servo  Motors & Drives

Dscf7807.jpg (46244 bytes)

Dscf7807c.jpg (50764 bytes)

Dscf7807b.jpg (48572 bytes)

7807

4 HP Reliance AC Servo Motor 

Reliance 4 HP AC Servo Motor ID# - W78Q9064M-XU -- Rated for Continuous Duty -- 2000 RPM -- Max RPM is 5500 -- 180C Mounting but also is a foot mount. -- Continuous Stall Torque 126 in/lbs.-- 1-1/8" Shaft -- 17P pin connector on rear of motor. 

$120.00

Dscf9825.jpg (43267 bytes)

9825

Servo Axis Controller AFC1100 

This is an Axis Controller made by FEC - Model - AXIS 103A - Series AFC1100 - Weighs 10#

$65.00

Dscf9848.jpg (44010 bytes)

9848

Servo Axis Controller AFC1100 

This is an Axis Controller made by FEC - Model - AXIS 103 - Series AFC1100 - Weighs 15# - This has the Heat Sink on the Right Side. 

$65.00

11557 Parker Compumotor Brushless Servo Motor Parker Compumoter Brushless Servo Motor # 71-007191-01 250 MTR KH  Other tag on motor says made by  Polymotor Genova Italy- Type FAS 1020053000001 - 200 Volts - 5300 RPM - 2 Nm Continuous - 6 Nm @ 10% Duty - Shaft measures 3/4" no key  - on rear of motor  $180.00  

Dscf16888.jpg (44759 bytes)

16888

3 Piece Weidmuller Encoder Servo Motion Interface

3 Piece Weidmuller Encoder Servo Motion Interface - Kit# is 90332-12400 -- MP6-M Machine Interface # 30330-12460 - MP6-E Encoder Interface Panel # 30330-12450 - MP6-S Servo Interface 30330-12470 - All Apear to be NEW - Weighs 3#

$65.00

For the Lot

  17433 NEW Ormec F-Series Power Supply 95H-2106 NEW Ormec F-Series Power Supply 95H-2106 - 3 Phase Input 230 VAC 50 Amps per Phase - Output 310 VDC 50 Amps - Weighs 30#  $1200.00  

Dscf17179.jpg (45439 bytes)

17179

INDRAMAT TVM Power Supply # TVM 2.2-050-220-/300

INDRAMAT TVM Power Supply # TVM 2.2-050-220-/300- Weighs 35#

$650.00

DSCF17436.JPG (43876 bytes)

17436

NEW Ormec Generation III Motion Controller Model 40
Model# GN3-40/2 v2.2b - Sells for $12,000.00

NEW Ormec Generation III Motion Controller Model 40 - Model# GN3-40/2 v2.2b - Sells for $12,000.00 - Measures 18" x 6" x 10-1/2" - Weighs 

$3200.00

NO PIC

18424

(2) NEW Allen Bradley "IMC-123 3 AXIS SERVO" "CONTROLLER" 1771-HS3A

(2) NEW Allen Bradley "IMC-123 3 AXIS SERVO" "CONTROLLER" 1771-HS3A  64KW

$950.00

 

 

21361

NEW Sanyo Denki Servo Amplifier

NEW BL Super Sanyo Denki Model # PZ0A015AM81P00 - Input 200 Volts -  Servo Amplifier - comes with connectors - Weighs 7#

 $145.00

 

 

21552

NEW Yaskawa AC Servo Motor

NEW Yaskawa AC Servo Motor - with Brake - # SGMGH-55A2A-YR12 - 13-1/4" Overall Length not counting Shaft extension - Shaft measures 28mm also has a Keyway - Weighs 85#

 $650.00

 

 

21753

Panasonic MSDA023ATA Servo Controller

Panasonic MSDA023ATA Servo Controller - 200-230 VAC 3 Phase Input - Output 92 V 3 Phase - 1.6 Amps 0 to 333.3 Hz - 200 Watt - Encoder 2500 ppr

 $65.00

 

 

23228

NEW Thomson Micron Gearhead 15:1

NEW Thomson Micron Planetary Gearhead Model # DT142-015 - Part # 32-113355-6621 -  Ratio 15:1 - Output Shaft 40mm - Weighs 45#

 $450.00

 

23240

NEW Yaskawa Servo Motor SGMG-30BWAAF

NEW Yaskawa Servo Motor SGMG-30BWAAF - Weighs 60#

 $450.00

 

  24543 NEW Rexroth Indramat Servo Motor MAC112C NEW Rexroth Indramat Servo Motor Part # 236654 - MAC112C-0-HD-3-C/130-A-2/S018 - Measures about 23-1/2" Long - 7-1/2" Square Face - Weighs 130# $1200.00   
  24553 NEW Rexroth Indramat Servo Motor MAC093 NEW Rexroth Indramat Servo Motor Part # 252955 MAC093B-0-GS-4-C/110-A-2/AM164SG - Weighs 50# $1200.00  
  27936 CP Servo Drive # ZFB05433 20 Amp CP Servo Drive # ZFB05433 20 Amp - Type 22 Servo Motor - K-259006-22 - Repair Tag Says repaired & Passed Final Inspection 11/12/2007 - Weighs 10# $450.00   
  30365 Bosch Servo Module  - 1070068005-101 SERVOi Bosch Servo Module  - 1070068005-101 SERVO i - Removed from a CNC Power Module - Weighs 5#  $250.00  
31518 Pacific Scientific Motor / Tach - 45VM620204 Pacific Scientific Servo Motor / Tach - 45VM62-020-4 - 24 VDC - 8.6 Oz-In/Amp - Weighs 10# $800.00  

 

32265

Reliance Servo Drive HR500

Reliance Servo Drive HR500/BLJD-06 - M/N 5RA0750 - DC Input 254~358 Volts 4.1 Amps - AC Output 162/288 Volts 4.9 Amps - Looks NEW - Weighs 10#

 $940.00

 

 

32273

Reliance Servo Drive HR500

Reliance Servo Drive HR500/BLJC-08R - M/N 5RD1601 - AC Input 1 or 3 Phase 200-230 VAC - 8.4 Amps - Output 254~358 DC Volts 4.2 Amps (Single Phase) 8.4 Amps (Three Phase) - Looks NEW - Weighs 10#

 $360.00

 

 

32437

NEW GE Fanuc Circuit Board # A16B-2200-0691

NEW GE Fanuc Circuit Board # A16B-2200-0691 - In Factory Box and Factory Sealed Bag. Weighs 3#

 $850.00

 

  32761 NEW Allen-Bradley Ultra3000 Servo Drive 2098DSDHV050XDN NEW Allen-Bradley Ultra3000 Servo Drive 2098-DSD-HV050X-DN - Part # 196469 - Firmware 1.34 - Series B - 220 PEAK Amps - 110 Cont. - 230/460 VAC Output - In Factory Packaging & Factory Box with Installation Manual - Removed from Anti-Static Bag for Pictures and put back with all original packaging - Weighs 30#  $950.00  

 

34400

Indramat Servo Motor Cleaned and Painted

Indramat Servo Motor MAC112D-1-ED-2HC/130-A-0 - Used Surplus - Spins Nice and Shaft in Great Condition - No other Tests were done - was Cleaned and Repainted - Weighs 200#

 650.00

 

 

35049

Alpha Gear Reducer Gearhead LP090M0250111

Alpha Gear Reducer Gearhead LP-090-M02-50-111 - Came off Shelf appears to be NEW or VGC - Weighs 15#

 $240.00

 

 

35054

Reliance Electric Micro100 - 3/4 HP Motor - Model # E723

 Reliance Electric Micro100 - 3/4 HP Motor - Model # E723 - Part# 0723-03-047 - Shaft is 5/8" - Weighs 15#

 $65.00

 

 

35117

Apex Dynamics Inc. 90^ Gearhead - AFR075-52-P2 - 20:1

Apex Dynamics Inc. 90^ Gearhead - AFR075-52-P2 - 20:1 - In Very Good Shape  - Weighs 15#

 $650.00

 

              Back to Top of Page        

 

Servo Motor & Resolver Cables

 

DSCF17665.JPG (44360 bytes)

17665

Ormec Cable # CBL-FMAC1/60

Ormec Cable # CBL-FMAC1/60 - F Series Motor Cable - 60' Long - 5 Pin Amphenol Type Connector - Weighs 7#

$45.00

DSCF17668.JPG (44817 bytes)

17668

Ormec Encoder Cable # CBL-QE25/60

Ormec Cable # CBL-qe25/60 - Encoder Cable - 60' Long - 10 Pin Amphenol Type Connector on one side - Weighs 7#

$55.00

DSCF17672.JPG (45576 bytes)

17672

Ormec Resolver Cable # CBL-FMACFL/60

Ormec Cable # CBL-FAMCFL/60 - Resolver Cable - 60' Long - Weighs 7#

$45.00

DSCF17673.JPG (44669 bytes)

17673

Ormec Resolver Cable # CBL-FMACS/60

Ormec Cable # CBL-FAMCS/60 - Resolver Cable - 60' Long - 19 Pin Amphenol type Connector on one Side - Weighs 7#

$55.00

  27953 NEW Siemens Cable # 6FX8002-5CA21-1BA0 NEW Siemens Cable # 6FX8002-5CA21-1BA0 - 10 meter - TDY3505 - Marking on cable says 800 570108.0011.21 $85.00  
28338 NEW Indramat Servo Cable IKS0251-33.0 NEW Indramat Servo Cable IKS0251330 - 33 meters long - Weighs 12# $160.00  
  28343 NEW Indramat Servo Cable IKS0251-37.0 NEW Indramat Servo Cable IKS0251-37.0 - 37 meters long - Weighs 15#  $170.00  
  28351 NEW Yaskawa Servo Cable # JZSP-CMP02-26/B-/GALC NEW Yaskawa Servo Cable # JZSP-CMP02-26/B-/GALC  $85.00  

Stepper Motors & Drives

  15550 Compumotor Stepper Drive # M83-93 Compumotor Stepper Drive # M83-93 - Came out of an Inventory from a closed up shop - Unit is untested and does not include any cables - Weighs 8#  $320.00  
  15553 Compumotor Stepper Drive # M57-83 Compumotor Stepper Drive # M57-83 - Came out of an Inventory from a closed up shop - Unit is untested and does not include any cables - Weighs 8# $420.00  

Dscf15786.jpg (46769 bytes)

15786

NEW Slo-Syn Geared Stepper Motor - 2700 oz. in. 

NEW Superior Electric Type SS221-2015 - 4.5 RPM @ 60 Hz. - 120 Volts - .4 Amps - Slo-Syn Geared Stepper Motor - 2700 oz. in. - 1/2" Keyed Shaft - Weighs 10#

$80.00

24306 NEW Superior Electric Slo-Syn Stepper Motor NEW Superior Electric Slo-Syn Stepper Gearmotor # M111-FD12EG4 - 4:1 Ratio - 2200 oz/in - 800 Steps Per Rev. - 2.26 VDC - 1/2" Output Shaft with woodruff key (included) - 3/8" Shaft on rear for encoder or other device - Weighs 12#  $160.00  
29115 NEW SLO-SYN Superior Electric Stepper Motor NEW SLO-SYN Superior Electric Stepper Motor - Type HS25 - 46 oz. in. - 5.4 DC Volts - 200 steps per rev. - Shaft is 1/4" - 2-1/4" x 2-1/4" Square Flange - Weighs 3# $35.00  

 

32335

NEW Vexta Stepper A7509-9412KSG

NEW Vexta Stepper A7509-9412KSG - 0.5 Degrees per Step - 2-Phase - Weighs 5#

 $80.00

 

 

35191

Rapidsyn Stepper Motor # 34D-92090

Rapidsyn Stepper Motor # 34D-92090 - Step Angle 1.8^ - 2.9 VDC - Class H - Rated Current 4.6A  - Used Motor but you can Feel Steps and it Spins Nice - Weighs 5#

$55.00

 

Surplus USA Home Page 

Click Here To visit OUR NEW Pieces Parts Page loaded with repair parts at great prices

email us with any questions, CLICK HERE  PLEASE Include ITEM #