7701
3/4" Carbide Tool Holder
This is a NEW Enco #250-1820 Carbide Cutter and Holder 1- Carbide Tool is included. Holder Shank Measures 3/4" x 3/4" - 3-3/4" Long - Overall Length is 5"
$15.00
9963
3M Speed-Loc Buffing Head System
This is a set of 4 Heads that are made for 3M or Norton Speed-Lok Discs - These are used for removing Rust, Paint cleaning castings etc. The Heads are spring loaded so you can push down but pressure is set by springs, which also adjust for slight misalignment. Measures 3" Round - Arbor for driver measures 1/2" Fine thread. Comes with 1 Course Disc.
$10.00
13245
NEW NIKKEN British Taper BT45 Tool Holder
NEW NIKKEN BT45 Tool Holder - # BT45-WE7/8-90 -- Weighs 10#
$12.00
16249
NEW 2" Carbide Endmill by Hannibal - 1-1/4" Shank
NEW 2" Carbide Endmill by Hannibal # 30264 - 1-1/4" Shank -2" OD x 1-1/2" Length - 2 Flute - Made in USA - Weighs 3#
$25.00
16391
(5) NEW .012" Feeler Gage Stock Precision Brand 125 ft
(5) NEW Precision Brand # 19430 - Tempered and Polished - .012" Feeler Gage Stock 125 ft total - Marked every 12" pulls from dispenser slot on box Weighs 3#
$15.00
For All 5 Boxes
17139
NEW 1-5/16" Drill Bit HSS - 24" Long - #4 Morse Taper
NEW 1-5/16" Drill Bit HSS - 24" Long - 18" of Cutting Length - #4 Morse Taper - Made in USA - Weighs 7#
$45.00
18900
(16) Artus Plastic Precision Shims 12 Packs -
16 Packs - 6 Sizes of Plastic Color Coded Precision Shims Packs - Made by Artus - All are 5" x 20" - (6) .005" Blue - (3) .010" Brown -(2) .015" Pink - (1) .025" White - (3) .030" Coral - (1) .040" Clear - Weighs 20#
$60.00
For All 16
21524
(2) NEW Federal Digital Indicators Model AS
(2) NEW Federal Digital Indicators Model AS - A-94 - Approx 1/8" Travel - 3 Pin Connector - Weighs 3#
$45.00
23207
(24) Cobalt M42 Drill Bits #9 - 6" Long -
(24) Cobalt M42 - 118^ Split Point Drill Bits #9 - 6" Long - Type M52CO - Stock# 52309 - Made in USA - Weighs 3#
$25.00
23214
(7) Uniform Tooling Inserts # 89-589-0270R -
(7) Uniform Tooling Inserts # 89-589-0270R - Measures .355" Flat to Point - Hole is .107" with .140 C'Bore - Only 2 Cutting Sides - Weighs 3#
$12.00
23613
(10) NEW Kyocera Ceratip RCMA1012TA Cutting Tool
(10) NEW - Kyocera Ceratip RCMA1012TA Cutting Tool - Grade A65 - Measures 1-1/4" @ Top tapers down to 1.100" @ Bottom - 3/4" Tall with a .385" Thru hole - Magnet does not Stick to this item - I gave these to a local machine shop to try, he used them on a heat treated roller and they worked great. He also made a holder for it which I will sell for an additional charge - Weighs 2#
$120.00
For All 10
Renishaw Head A-2012-0002
Renishaw Head A-2012-0002
- Head Only -
Appears to be NEW - Weighs 10#
$850.00
NEW Renishaw Head A-2012-0002
NEW Renishaw Head A-2012-0002 - Head with Probes - Weighs 10#
$980.00